RFQ, NM - Oil filtration system and/or service | Precision Filtration Products

CONTACT INFORMATION:

Name of company:

Technical contact, name:

Technical contact, e-mail address:

Technical contact, telephone number:

Purchasing contact, name:

Purchasing contact, e-mail address:

Purchasing contact, telephone number:

BACKGROUND INFORMATION

General situation / Problem experienced:

Models and specifications of all mechanical systems involved in operations:

Most critical internal component/s of systems cited above:

System breathers:

Installed
Not installed
Not applicable

Models and specifications of any filtration equipment currently in use:

Summary of desired solution / Ultimate goals:

Flush system via turbulent flow
Reduce water/moisture
Reduce entrained air/gas
Reduce solids / particulate contamination
Remove other liquids (e.g. acid, oils, chemicals)

Latest visual appearance of oil observed:

Milky
Dark
Clear

Latest measured levels of contamination/s:

Method/Procedure by which contamination levels were measured:

Observed frequency of contamination ingression:

Constant
Intermittent
Unknown / Unable to determine

Budget limitations / Target pricing:

REQUEST LOGISTICS

Expected end user of equipment / recipient of service:

Our company
A customer of our company

Type of commercial interest:

Equipment purchase
Equipment rental ONLY
Equipment purchase OR rental
Equipment rental AND on-site service

Desired timing to receive equipment and/or service:

Urgently / As soon as possible
Within 2 to 3 weeks
Within 1 to 2 months
Within 3 to 6 months
More than 6 months from now

IF for equipment rental and/or service, time expected to need on-site:

Less than 1 week
1 to 3 weeks
1 month or more
Indefinite / Unknown at this time
Not applicable

Location where equipment should be delivered and/or service rendered:

Preferred method to receive the equipment:

Pick up from our warehouse
Receive on site, sent via courier
Receive on site with our service crew

ENVIRONMENTAL CONDITIONS

Type of facility / operating environment/s:

Generally dusty/contaminated ambient air?

Yes
No
Unknown / Unable to determine

Altitude above sea level:

Range of ambient temperatures:

Range of ambient relative humidity:

BASE OIL

Type of oil/s in question:

Mineral
Synthetic
Both mineral and synthetic
Unknown / Unable to determine

Specific oil/s to be filtered or flushed:

Physical state at ambient temperature:

Oil viscosity, complete profile:

Chemical composition profile:

Boiling temperature:

Range of oil/system operating pressures:

Range of oil/system operating temperatures:

Range of oil/system operating flow rates:

Total volume of oil/reservoir AND desired processing frequency:

SYSTEM, Base/Construction

Third-party unit/system that we could use as reference:

Number of units desired:

Desired orientation and mobility of unit/system:

Mobile (cart-mounted)
Permanent installation (floor-mounted)
Permanent installation (panel/wall-mounted)
Portable (hand-held / drum-mounted)
Temporary installation (skid-mounted)
Hybrid / Various orientations required

Required engineering certification/s:

NEMA rating of electrical enclosure:

Additional certification/s requested:

Material/s of construction:

Material of exterior coating/finish:

Maximum acceptable weight:

Maximum acceptable dimensions:

Any construction or operating limits not specified above:

Instrumentation to be included:

Preferred energy source / power supply:

Electrical source
Pneumatic source / Compressed air
Hydraulic source / Process water

Specifications of required/available energy/power connections:

Additional desired characteristics of housing:

Lifting hooks/lugs mounted on top
Spill containment tank
Other (specified below)

SYSTEM, Connections & Access

Required inlet connection types and sizes:

Required outlet connection types and sizes:

Specifications of hoses to be included:

Flooded suction; Distance of pump submersion inside tank/reservoir:

Suction lift; Distance above bottom of tank from which pump can suck:

SYSTEM, Performance

Type of contaminants to reduce / remove from oil:

Acid
Air / Gases
Solid particulate
Water (free)
Water (dissolved)
Water (emulsified)
Varnish / lacquer / sludge / tar
Other (specified in notes below)

Desired level of particle retention efficiency (detection testing):

Desired level of water dehydration efficiency (detection testing):

Desired filtration efficiency (other contaminant):

Desired timing to reach cleanliness goals mentioned above:

Maximum desired flow rate:

ADDITIONAL CONSIDERATIONS

Additional components/accessories requested:

Suction wand to transfer oil out of tank/reservoir
Separate oil-heating system (skid-mounted)
Temporary holding tank
Water-detection probes
Special valves or fittings (specified below)

Additional details or notes to be considered:

RFQ, NM – Oil filtration system and/or service