When fueling equipment that is deemed critical for a project, it is important to make sure that the fuel is clean and dry, to ensure that the engine and fuel [ read more ]
12,000 gallons of Turbine Reservoir Oil filtered during 2-day outage
Here we are back again with some more notes from the industrial filtration field… This time a power generation facility in central Pennsylvania needed their turbine reservoir oil cleaned during [ read more ]
Flew On-Site to Flush Lube Oil in P&W Gas Turbines
A small power generation company in the Midwest contracted us to perform lube oil flushes on two Pratt & Whitney gas turbines. After some discussions with their team, and determining [ read more ]
Power-Gen Purges Particulate from Turbine Oil
We recently found out about a power generation company on the East Coast that needed a temporary filtration system to remove water and particulate contamination from turbine oil. They were [ read more ]
Packing a Punch at the Plastic Container Manufacturing Plant
I was approached by a maintenance manager at a plastic container manufacturing plant regarding oil quality. This specific company produces plastic containers and has several plants across the U.S. Each [ read more ]
Notes From the Field: Matt Reports Another Flushing Success Story
One of our utility suppliers called us with the need to transfer oil from one holding tank to another holding tank. Tank “A” was filled with approximately 2,200 gallons of [ read more ]
Pneumatic Filter Panel (aka “the Panimal”)
A refinery contacted us recently that required a filter system to transfer 55 gallon drums of ISO 100 oil to their storage tanks (see attached picture). They wanted to filter [ read more ]
Success Story: Vacuum Dehydrators and Paper Mills
We received a call from a large paper mill customer who had a high percentage of water in their oil reservoir. They were looking for an immediate solution to [ read more ]
Oil Quality and Our Drum Top Filter System
Last week a large paper mill ordered a second Drum Top Filter (DTF) system and Recirculation Adapter Kit to help with their Oil quality Improvement Program. They had so much [ read more ]
High Velocity Flush of Hydraulic Power Units
PFP’s Flushing Skid hits ISO Cleanliness Code for HPUs reducing downtime and saving the customer money.