Precision Filtration Products - Industrial and Commercial Filters and Filtration Systems
Friday, August 18, 2017  

Fuel Monitors

Water absorbent elements. Available in 2-inch and 6-inch diameters meeting latest IP 1583 Specifications. Also available are the patented Posi-stop PS fuses.

Monitor Cartridges

The cartridge is made up of layered and pleated, multi-media sections with inner support shells and an outer wrap. A special water absorbent media retains water and the pleats expand. As the maximum water holding capacity is reached, a reduction in flow occurs, indicating the cartridge should be changed.

Each FG Series Fuel-Gard monitor cartridge is constructed of various water absorbent media, plus fine filtration layers pleated to give you long life.

Each FG Series Fuel-Gard monitor cartridge is constructed of various water absorbent media, plus fine filtration layers pleated to give you long life.

The FG Series Fuel-Gard monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

The GNG Series Go-No-Go monitor cartridges are designed to flow from the outside to inside at a rate of 1 gallon (3.79 liters) per inch of length.

The filters are designed to flow at a rate of 13 gpm (FGS-O-405) and 15 gpm (FGS-O-409).

Monitor Housings / Vessels

Eliminate the need for other water defense devices and receive maximum water removal, solids holding capacity and shutdown protection to assure clean, dry fuel delivery while meeting the latest edition of E.I. specification #1583.

The Facet VFGM Series SuperFlex monitor housings, equipped with FG-O Series 6” (152 mm.) OD monitor cartridges, continually check for the entire flow of fuel, not just mere samples, for water or solids contamination.

A state of the art filtration system designed to prevent water contaminants from entering your aircraft during refueling.

The Facet Fuel-Gard monitor cartridge performs three jobs to assure clean, dry fuel. It absorbs free and emulsified water to less than 2 ppm, removes ultrafine solids, and shuts down system flow when hit with a localized slug of water.

For maximum water removal, solids holding capacity and shutdown protection to assure clean, dry fuel.

By performing three jobs, this small compact monitor assures clean, dry fuel. It absorbs free and emulsified water, removes ultra-fine solids, and shuts down system flow when hit with a localized slug of water. Both interior and exterior surfaces of the carbon steel body are epoxy coated to protect against corrosion.



TambiƩn podemos comunicar con usted en espaƱol / castellano!




Sign up for our newsletter today!
* indicates required



Also make sure to catch us on...